Khaled Stainless, located in Cairo, Egypt, is a trusted manufacturer and supplier of Stainless Steel 202 fasteners, offering budget-friendly fastening solutions for light to medium-duty applications. These fasteners are crafted with precision threading, consistent dimensions, and carefully controlled mechanical properties to guarantee reliable joint performance. Khaled Stainless provides SS 202 bolts, nuts, washers, and threaded rods for various industries, including furniture, fabrication, construction, and utilities, where strength and affordability are essential. With certified raw materials, a clean surface finish, and dependable bulk supply capabilities, Khaled Stainless delivers economical stainless fastening solutions for non-aggressive service conditions.
Stainless Steel 202 is a low-nickel, high-manganese austenitic stainless steel that typically contains around 17–19% chromium, 4–6% nickel, and 7–10% manganese, with carbon levels usually below 0.15%. The higher manganese content helps offset the lower nickel, ensuring good strength and formability. The typical mechanical properties of SS 202 fasteners include a tensile strength of about 520–760 MPa, yield strength around 275–350 MPa, and elongation of roughly 30–40%, depending on the amount of cold work. While SS 202 is non-magnetic in its annealed state, it may exhibit slight magnetism after being formed.
| Standard | As per IS , ASTM , BS etc. |
| Specification | ASTM A/ASME SA 193/194 |
| Size | M02 to M33 |
| Length | 3 mm to 200 mm |
| Element | Content (%) |
|---|---|
| Iron, Fe | 68 |
| Chromium, Cr | 17- 19 |
| Manganese, Mn | 7.50-10 |
| Nickel, Ni | 4-6 |
| Silicon, Si | ≤ 1 |
| Nitrogen, N | ≤ 0.25 |
| Carbon, C | ≤ 0.15 |
| Phosphorous, P | ≤ 0.060 |
| Sulfur, S | ≤ 0.030 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 515 MPa | 74694 psi |
| Yield strength | 275 MPa | 39900 psi |
| Elastic modulus | 207 GPa | 30000 ksi |
| Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break | 40% | 40% |
Contact us to get a quick quote for your requirement.
Stainless Steel 202 nuts are available in sizes ranging from M3 to M64 and beyond. They provide excellent mechanical strength, corrosion resistance, and durability, making them suitable for high-stress construction and industrial machinery applications.
These Stud Bolts come in lengths from 1/4″ to 4″ and diameters from 6mm to 100mm. They are used in various industrial applications due to their high tensile strength, corrosion resistance, and reliability under extreme conditions.
Stainless Steel 202 bolts, available in sizes from M5 to M100, are used in automotive, construction, and marine industries. They offer excellent corrosion resistance, high strength, and durability, ensuring secure and long-lasting connections.
Threaded rods in Stainless Steel 202 range from 1/4″ to 2″ in diameter and up to 6 meters long. These rods are widely used in construction, infrastructure, and manufacturing for their strength, corrosion resistance, and versatility.
Stainless Steel 202 screws are available in sizes from M1.6 to M20. These screws offer excellent corrosion resistance and high tensile strength, making them suitable for various applications, including electronics, furniture, and machinery.
Washers made from Stainless Steel 202 come in sizes from 1/8″ to 4″. They provide a reliable solution for distributing loads and preventing surface damage, with excellent corrosion resistance and durability for long-term use in various environments.
We offer the complete set of MTCs as per EN 10204/3.1b, PMI Test Certificate, 100% radiograph test report, and Third Party Inspection Certificate for stainless steel 202 fasteners. This strongly proves our commitment towards the satisfaction of our client as well as the endeavor for getting our products into excellence. The highest standards are, therefore, ensured for all our fasteners and consequently, provide for the best and most reliable solutions to cater to your industrial requirements at Khaled Stainless, Cairo, Egypt.
Stainless Steel 202 fasteners are commonly utilized in situations where moderate corrosion resistance, solid strength, and cost-effectiveness are key factors. You’ll find these fasteners in furniture manufacturing, handrails, fencing systems, display racks, HVAC installations, light steel structures, appliance assembly, and general fabrication. They’re also used in residential plumbing supports and interior construction where moisture exposure is minimal. SS 202 fasteners are known for their reliable performance, making them a popular choice across various applications.
©2024 Khaled Stainless All Rights Reserved.
